Posts tagged with "hp"

“Don’t bury the lede”

A working HP ProCurve Java WebUI screenshot to show that I got it working.

My earlier post HP ProCurve 2800 initial setup discussed an initial configuration of a network switch and mentioned in passing that I got the ProCurve Java WebUI working in a relatively safe manner. Here is how I put that together on a modern machine running Windows 10 Professional 64-bit.

^{_{WARNING: It should go without saying that you should not use the FireFox Web Browser from January 2017 that we are setting up here for the very old Java Web App supported on hardware released in 2004 and EOL in 2013 on the public internet. You will be hacked without a doubt in seconds. These are completely unpatched versions of two very very very old pieces of software. You have been duly warned.}}

Get access to switch console

You will need a console serial cable to get into your HP ProCurve 2800 switch.

Here is the one I bought from Amazon OIKWAN - USB Cisco Console Cable, USB to RJ45 Console Cable which has been useful on some other project as well. I have a break out for the RJ45 to let me use this on an old BlackArmor NAS and to interface with some robotics equipment. You mileage may vary but this one works great for me.

This is the ProCurve 2810-24 that is all 1Gbps ports with four SFP (not SFP+) ports that you can use with fiber or DACs. I bought three of these so I have a SAN and two home networks… then I picked up another one as a spare because it was less than $25 on eBay. So I’m all in on this switch for my home networks.